Repair check: what the repair costs
For a deal with damage, the repair check works out roughly what the repair costs: which parts are broken, what suitable spare parts cost and how much labour and paint come on top. So you see before the first call whether the car is worth it.
On this page
- What is the repair check?
- How do I start a check?
- Do other garages see my check?
- What does the result show?
- What do “Definitely broken” and “Only if damaged” mean?
- What does the check show for hail?
- Which offer does the total use?
- How does the check know whether a part has defects?
- Can I use my own hourly rate?
- How accurate is the check?
- Does the repair check cost anything?
What is the repair check?
The repair check is an estimate of the repair costs for a deal with damage. An AI reads the photos and the text of the listing and finds the damaged parts. Added to that are prices for spare parts for exactly this model and the labour including paint. At the end you see how much remains below the market value after the repair.
How do I start a check?
Open a deal and go to the “Repair check” section. There, tap “Calculate repair”. A check takes about three to six minutes. You can keep working on other pages in the meantime: at the bottom of the screen you see how far it has got, and one tap brings you back to the result.
- 1Reading photosThe check loads the photos of the listing.
- 2Looking for damageThe AI looks at every photo and zooms in on the spots it wants to examine more closely.
- 3Asking shops for pricesFor every part that needs replacing, offers come in from shops and marketplaces.
- 4Checking parts with AIThe AI checks the photos and text of every part offered before the totals are calculated.
Do other garages see my check?
Yes. For each deal there is one check for all garages. Whoever starts it first waits those few minutes; after that everyone sees the result immediately, without waiting again. The check factors in your own hourly rate for you personally; the damage and parts are the same for everyone.
What does the result show?
At the top is “Repair of what’s definitely broken” with parts, labour and paint, and next to it “Remains below market value”. Below follow “Damage detected” with the spots on the photos, “Parts and prices” with all offers, and “Labour and paint” with the hours per part.
| Area | What it shows |
|---|---|
| “Damage detected” | Each damage with a number on the photo, how certain it is and what needs doing: check, remove dents, paint, repair or replace. |
| “Parts and prices” | For each part, the offers of several shops with price, shipping and condition. The offer the total is based on is marked in green. |
| “Labour and paint” | The hours per part at your hourly rate, plus paint and small materials. |
What do “Definitely broken” and “Only if damaged” mean?
“Definitely broken” is damage that can be seen on a photo or is stated in the listing; it counts towards the repair. “Only if damaged” are parts that are often affected by this kind of damage but cannot be seen on any photo. Their costs are shown separately so you know the worse case.
What does the check show for hail?
For hail, the check calculates paintless dent removal, based on the number of dents. Because a new part can be cheaper when there are many or deep dents, it also shows, under “For hail: replace instead of removing dents”, spare parts with prices for every affected panel and the comparison with your hourly rate. The total includes the dent removal.
Which offer does the total use?
For each part, the total uses the “Best fit”: first parts from the same version of the car, then from the same model series, then listings whose title matches. Within that, a part without defects comes before one with defects, and then the cheapest including shipping.
Cheaper than the Best fit?If a cheaper offer is listed for a part, it is less certain to fit or has defects. With the “Show offers” filter you see only new parts, only used ones without defects or only parts with defects.
How does the check know whether a part has defects?
For used parts, an AI checks the photos and the seller’s description. It removes a different part, or one for another car, from the list. If it finds defects, they appear on the offer with the photo number, for example “Dent (photo 3)”. Checked offers carry the note “Photos and text checked by the AI”.
Check for yourself before you buy.The AI can be wrong too. Clarify the condition and fit of a part with the shop or the seller, ideally via the part number, before you order.
Can I use my own hourly rate?
Yes. Under “Labour and paint” you find “Your hourly rate”. Enter your rate in francs and save it. It then applies to all checks you view, including ones already finished. The hours per part are calculated the way a body shop usually needs them.
How accurate is the check?
The check is an estimate from photos and text, not an expert report and not a quote. It cannot know about damage that is not visible on any photo. That is why the amounts are given as a range. If structural damage is suspected, “Please check” appears at the top. The check does not replace an inspection.
Below the result, the check asks “Is the check right?”. Your answer helps make it more accurate. What Prisradar guarantees here and what it does not is set out in the terms and conditions under section 11.
Does the repair check cost anything?
No, the repair check is included in the subscription, at no extra cost and without a limit per garage. Prisradar may limit the number of checks per day. Once it is reached, this is shown at “Calculate repair”, and the next day the check can be started again. A finished check always stays visible.
Didn’t find what you’re looking for?Write to info@prisradar.ch or use the contact form.